A Solution for Your Motor Cooling Needs
See a 10-15% decrease in oil temperatures.
Motors that use the Brandon and Clark Forced Oil Cooler see a 10-15% decrease in oil temperature as compared to motors with no cooling system. Filtered and cooled oil is critical for a longer service life, yielding positive results in your operation.
- 20 Gallon tank
- Pump and fan motor are the same for redundancy and to maintain oil flow
- Hydraulic hose for environment and long lasting
- All hoses are the same length for easy replacement
- 21 Micron oil filter on output
- Motor maintains normal operating condition, even with the forced oil cooler system installed, motor can run with or with out pump operation.
- Explosion proof motors
- 120V single phase and 230/480V three phase motors available
- Full length sight glass with general oil temperature
- Large return line port for gravity flow back with out restriction
- Many off the shelf components for easy and fast repair/replacement
- Low pressure system
- All units are flow and leak tested before installation
- All metal pump components
- Closed loop system
- Oil tank drain port