Atlas Copco hose reels are specially developed using our knowledge of power tools, and with your demands in mind, to achieve maximum productivity and highest possible safety in the workplace.

HM Flex L
HM 10 fram47 cm

The range of hose reels is wide to meet all possible needs, with hose sizes ranging from 8 mm to 25 mm. The HM FLEX L, with a steel casing and high quality rubber hose, handles both air and water. The HM FLEX L is recommended for all screwdrivers, pulse tools, impact wrenches, drills, chipping and riveting hammers and grinders up to 1000 W.

    • Low pressure drops to increase productivity
    • Safe workplace with no hoses lying on the floor that operators can trip on
    • Wide range to fit with all Atlas Copco tools
    • Spatter resistant rubber hoses as option
    • NBR rubber hose
    • Movable brackets for floor, wall and ceiling mounting
    • High flow capacity
    • Working temperature: –30°C ‑ +60°C
    • Max. working pressure is 15 bar

** *Inlet hose length: 1 m

Hose type Rubber
Connection inlet BSP male 1/2 inch
Connection distribution hose BSP male 1/2 inch
Weight 35,27 lb
Air flow 46,61 cfm
Hose inside dia 1/2 inch
Hose length 10 m

HM Light
Air Line Accessories,HM Light,Hose Reels

Hose Reels HM Light are specially selected using our knowledge of power tools and your demands in mind in order to reach maximum output in the workplace. The wide range consist of 12 different models, with hose sizes ranging from 5/16” to 1”, to ensure your needs are met. There are models made of composite material, steel or die casted aluminum and the models are open or closet in order to fulfill your needs. Reach the full potential of your tools, use the Atlas Copco Hose Reels.

The HM Light has a robust design with a high impact composite casing. The outlet slot is optimized to provide ideal pull-out angle for the hose. The HM light is recommended for small and medium screwdrivers, small and medium pulse tools, small drills, impact wrenches up to 1/2” size and riveting and chipping hammers.

      • Low pressure drops to increase productivity
      • Safe workplace with no hoses lying on the floor that operators can trip on
      • Wide range to fit with all Atlas Copco tools
      • Snap-on, pivoting wall bracket for flexible use
      • PVC/PUR hose for flexibility
      • Strong and durable
      • Hose end provided with pressed fitting and steel spiral hose protector for durability
      • Hose easily replaced when needed
      • Max working pressure: 218 psi
      • Working temperature: +32°F-+122°F
      • Inlet hose length: 3.3 ft
HM Open
Air Line Accessories,HM Open,Hose Reels

Hose Reels HM Open are specially selected using our knowledge of power tools and your demands in mind in order to reach maximum output in the workplace. The wide range consist of 12 different models, with hose sizes ranging from 5/16” to 1”, to ensure your needs are met. There are models made of composite material, steel or die casted aluminum and the models are open or closet in order to fulfill your needs.

The HM Open has an open composite casing and 3/8” or ½” hose. HM Open is a reliable, medium sized hose reel recommended for screwdrivers, impact wrenches, pulse tools, drills, chipping and riveting hammers and grinders up 1000W.

      • Low pressure drops to increase productivity
      • Safe workplace with no hoses lying on the floor that operators can trip on
      • Wide range to fit with all Atlas Copco tools
      • Rubber hose for grinding applications
      • Outlet roller position can be adjusted through 120 degrees for optimal pull-out angle for flexible use
      • Strong and durable
      • Hose end provided with steel spiral hose protector for durability
      • Latch function is easily disengaged
      • Spring tension is easily adjusted
      • Floor, wall or ceiling mounting to cover all customer needs
      • Max working pressure: 218 psi
      • Working temperature: +14°F-+140°F
      • Inlet hose length: 3.3 ft
HM Open XL
Air Line Accessories,HM Open XL,Hose Reels

HM Hose Reels HM Open XL are specially selected using our knowledge of power tools and your demands in mind in order to reach maximum output in the workplace. The wide range consist of 12 different models, with hose sizes ranging from 5/16” to 1”, to ensure your needs are met. There are models made of composite material, steel or die casted aluminum and the models are open or closet in order to fulfill your needs.

Hose reels in the HM Open XL series have an open epoxy coated die cast aluminum casing with ½”, ¾” and 1” rubber hose. It is a heavy duty hose reel for long and heavy hoses. HM Open XL is recommended for use with high air flow consuming tools and high powered grinders.

  • Low pressure drops to increase productivity
  • Safe workplace with no hoses lying on the floor that operators can trip on
  • Wide range to fit with all Atlas Copco tools
  • Rubber hose for grinding applications
  • Strong, durable and highly corrosion resistant
  • Extremely high flow capacity
  • Fully protected inner mechanisms
  • Floor, wall or ceiling mounting to cover all customer needs
  • Max working pressure: 218 psi
  • Working temperature: +14°F-+140°F
  • Inlet hose: 3.3 ft
HM Open XL,Air line accessories,Hose reels
Contact Us

Send us an email and we'll get back to you.

Not readable? Change text. captcha txt