Air preparation unit MAXI-B

Atlas Copco offers a wide range of air preparation units that are designed to help you get maximum productivity from your tools. They ensure minimal pressure drop and thus minimum energy losses in the air distribution system, benefiting the environment and cutting your operating costs. The lifetimes of your tools will be extended by using air preparation units and with that come lower repair costs and less downtime.

1″ BSP – MAXI B

Product Description Mfg No.
MAXI F/R 25B-B 1″ air preparation unit, MAXI-B, filter/regulator 9093 0075 51
MAXI F/RD 25B-B 1″ air preparation unit, MAXI-B, filter/regulator+lubricator 9093 0075 81
MAXI FIL 25B-B 1″ air preparation unit, MAXI-B, filter 9093 0074 21
MAXI FRD 25B-B 1″ air preparation unit, MAXI-B, filter/regulator+lubricator 9093 0076 01
MAXI REG 25B 1″ air preparation unit, MAXI-B, regulator 9093 0074 61
MAXI REG 25B-LP 1″ air preparation unit, MAXI-B, regulator 9093 0074 81
MAXI DIM 25B 1″ air preparation unit, MAXI-B, lubricator 9093 0075 21

Features and Benefits

MAXI F/R 25B-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI F/RD 25B-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. Atlas Copco oil lubricators ensure a long, efficient and trouble-free life for your pneumatic tools and components. The use of a lubricator will increase the power in vane motors by about 10-15% and prolong the lifetime of a vane motor up to three times. The motor will work much more efficiently, and with less friction.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI FIL 25B-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI FRD 25B-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. Atlas Copco oil lubricators ensure a long, efficient and trouble-free life for your pneumatic tools and components. The use of a lubricator will increase the power in vane motors by about 10-15% and prolong the lifetime of a vane motor up to three times. The motor will work much more efficiently, and with less friction.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI REG 25B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI REG 25B-LP

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI DIM 25B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts. The bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco oil lubricators ensure a long, efficient and trouble-free life for your pneumatic tools and components. The use of a lubricator will increase the power in vane motors by about 10-15% and prolong the lifetime of a vane motor up to three times. The motor will work much more efficiently, and with less friction

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -10°C to +50°C at 10 bar
  • 0-17.5 bar inlet pressure capacity
  • 0.5-12 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
Air preparation unit MAXI-B

1″ NPT – MAXI B US

Product Description Mfg No.
MAXI DIM 25BU 1″ air preparation unit, MAXI-B, lubricator – US 9093 0075 31
MAXI F/R 25BU-B 1″ air preparation unit, MAXI-B, filter/regulator – US 9093 0075 61
MAXI FIL 25U-B 1″ air preparation unit, MAXI-B, filter – US 9093 0074 31
MAXI FRD 25BU-B 1″ air preparation unit, MAXI-B, Filter+regulator+lubricator – US 9093 0076 11
MAXI REG 25BU 1″ air preparation unit, MAXI-B, regulator – US 9093 0074 71

Features and Benefits

MAXI DIM 25BU

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI FRD unit is delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature 14°F to 122°Fat 145 psi
  • 0-254 psi inlet pressure capacity
  • 7-174 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI F/R 25BU-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI FRD unit is delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature 14°F to 122°Fat 145 psi
  • 0-254 psi inlet pressure capacity
  • 7-174 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI FIL 25U-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI FRD unit is delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature 14°F to 122°Fat 145 psi
  • 0-254 psi inlet pressure capacity
  • 7-174 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI FRD 25BU-B

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI FRD unit is delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature 14°F to 122°Fat 145 psi
  • 0-254 psi inlet pressure capacity
  • 7-174 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MAXI REG 25BU

The high flow MAXI-B air preparation unit’s main application is to prepare the air for tools with high flow demands, such as Atlas Copco Turbo grinders and large vertical and angle grinders, also when long distribution hoses are used. The MAXI-B has a die-cast zinc housing and aluminum bowls with polypropylene inserts and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MAXI FRD unit is delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 244 l/s max. air flow for combined units
  • Low pressure drop
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature 14°F to 122°Fat 145 psi
  • 0-254 psi inlet pressure capacity
  • 7-174 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI OPTIMIZER FRD Air preparation units

1/2″ BSP – MIDI Optimizer

Product Description Mfg No.
MIDI Optimizer DIM 1/2″ air preparation unit, lubricator 9093 0021 10
MIDI Optimizer DIM EP 1/2″ air preparation unit, lubricator 9093 0021 33
MIDI Optimizer F/R A 1/2″ air preparation unit, filter/regulator 9093 0021 12
MIDI Optimizer F/R HP A 1/2″ air preparation unit, filter/regulator 9093 0021 32
MIDI Optimizer F/R HP M/S 1/2″ air preparation unit, filter/regulator 9093 0021 31
MIDI Optimizer F/R M/S 1/2″ air preparation unit, filter/regulator 9093 0021 13
MIDI Optimizer F/RD A 1/2″ air preparation unit, filter/regulator+lubricator 9093 0021 16
MIDI Optimizer F/RD A EP 1/2″ air preparation unit, filter/regulator+lubricator 9093 0021 35
MIDI Optimizer F/RD M/S 1/2″ air preparation unit, filter/regulator+lubricator 9093 0021 17
MIDI Optimizer F/RD M/S EP 1/2″ air preparation unit, filter/regulator+lubricator 9093 0021 36
MIDI Optimizer FIL A 1/2″ air preparation unit, filter 9093 0021 01
MIDI Optimizer FIL M/S 1/2″ air preparation unit, filter 9093 0021 02
MIDI Optimizer FRD A 1/2″ air preparation unit, filter+regulator+lubricator 9093 0021 24
MIDI Optimizer FRD M/S 1/2″ air preparation unit, filter+regulator+lubricator 9093 0021 25
MIDI Optimizer REG 1/2″ air preparation unit, regulator 9093 0021 05
MIDI Optimizer REG HP 1/2″ air preparation unit, regulator 9093 0021 30
MIDI Optimizer REG LP 1/2″ air preparation unit, regulator 9093 0021 06

Features and Benefits

MIDI Optimizer DIM

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer DIM EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer F/R A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/R HP A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP High Pressure Regulator
MIDI Optimizer F/R HP M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP High Pressure Regulator
MIDI Optimizer F/R M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD A EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer F/RD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD M/S EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer FIL A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FIL M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG HP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP High Pressure Regulator
MIDI Optimizer REG LP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • LP Lockable Regulator
MIDI OPTIMIZER FRD Air preparation units

1/2″ NPT – MIDI Optimizer US

Product Description Mfg No.
MIDI Optimizer DIM 1/2″ air preparation unit, lubricator – US 9093 0021 11
MIDI Optimizer F/R A 1/2″ air preparation unit, filter/regulator – US 9093 0021 14
MIDI Optimizer F/R M/S 1/2″ air preparation unit, filter/regulator – US 9093 0021 15
MIDI Optimizer F/RD A 1/2″ air preparation unit, filter/regulator+lubricator – US 9093 0021 18
MIDI Optimizer F/RD A EP 1/2″ air preparation unit, filter/regulator+lubricator – US 9093 0021 37
MIDI Optimizer F/RD M/S 1/2″ air preparation unit, filter/regulator+lubricator – US 9093 0021 19
MIDI Optimizer F/RD M/S EP 1/2″ air preparation unit, filter/regulator+lubricator – US 9093 0021 38
MIDI Optimizer FIL A 1/2″ air preparation unit, filter – US 9093 0021 03
MIDI Optimizer FIL M/S 1/2″ air preparation unit, filter – US 9093 0021 04
MIDI Optimizer FRD A 1/2″ air preparation unit, filter+regulator+lubricator – US 9093 0021 26
MIDI Optimizer FRD M/S 1/2″ air preparation unit, filter+regulator+lubricator – US 9093 0021 27
MIDI Optimizer REG 1/2″ air preparation unit, regulator – US 9093 0021 07
MIDI Optimizer REG LP 1/2″ air preparation unit, regulator – US 9093 0021 08

Features and Benefits

MIDI Optimizer DIM

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/R A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/R M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD A EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer F/RD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD M/S EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer FIL A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FIL M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 130 ft before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG LP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°F to + 140°F at 145 psi
  • Working temperature for filters +35°F to +140°F at 145 psi
  • 0-232 psi inlet pressure capacity
  • 7-116 psi outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI OPTIMIZER FRD Air preparation units

3/4″ BSP – MIDI Optimizer

Product Description Mfg No.
MIDI Optimizer DIM 3/4″ air preparation unit, lubricator 9093 0021 45
MIDI Optimizer DIM EP 3/4″ air preparation unit, lubricator 9093 0021 54
MIDI Optimizer F/R A 3/4″ air preparation unit, filter/regulator 9093 0021 46
MIDI Optimizer F/R A HP 3/4″ air preparation unit, filter/regulator 9093 0021 48
MIDI Optimizer F/R M/S 3/4″ air preparation unit, filter/regulator 9093 0021 47
MIDI Optimizer F/R M/S HP 3/4″ air preparation unit, filter/regulator 9093 0021 49
MIDI Optimizer F/RD A 3/4″ air preparation unit, filter/regulator+lubricator 9093 0021 50
MIDI Optimizer F/RD A EP 3/4″ air preparation unit, filter/regulator+lubricator 9093 0021 55
MIDI Optimizer F/RD M/S 3/4″ air preparation unit, filter/regulator+lubricator 9093 0021 51
MIDI Optimizer F/RD M/S EP 3/4″ air preparation unit, filter/regulator+lubricator 9093 0021 56
MIDI Optimizer FIL A 3/4″ air preparation unit, filter 9093 0021 40
MIDI Optimizer FIL M/S 3/4″ air preparation unit, filter 9093 0021 41
MIDI Optimizer FRD A 3/4″ air preparation unit, filter+regulator+lubricator 9093 0021 52
MIDI Optimizer FRD M/S 3/4″ air preparation unit, filter+regulator+lubricator 9093 0021 53
MIDI Optimizer REG 3/4″ air preparation unit, regulator 9093 0021 42
MIDI Optimizer REG HP 3/4″ air preparation unit, regulator 9093 0021 44
MIDI Optimizer REG LP 3/4″ air preparation unit, regulator 9093 0021 43

Features and Benefits

MIDI Optimizer DIM

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer DIM EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP: DIM version for pulse tools, lubricator adjusts for for impulsing tools
MIDI Optimizer F/R A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/R A HP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP High Pressure Regulator
MIDI Optimizer F/R M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/R M/S HP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP: High pressure regulator
MIDI Optimizer F/RD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD A EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP: DIM version for pulse tools, lubricator adjusts for for impulsing tools
MIDI Optimizer F/RD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer F/RD M/S EP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • EP For pulse tools, lubricator adjusted for impulsing tools
MIDI Optimizer FIL A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FIL M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD A

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer FRD M/S

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a ½” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco filters are equipped with a cyclone system. Using centrifugal force, this separates out a high percentage of the heavier solid water particles, while the filter ensures that the amount of dirt entering your tool is kept to a minimum. This means longer working cycles for the tools and minimum service time. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity. The Optimizer nano-lubricator adjusts automatically to the flow demand and ensures that the right amount of oil is supplied to the motor at all flow rates. This minimizes the lubrication needed. The nano oil mist, with particle size of 200 nm, can be transported by the air stream up to 40 m before the oil particles fall out of the stream. This means there is no oil in the hose and direct lubrication is not necessary.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
MIDI Optimizer REG HP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • HP High Pressure Regulator
MIDI Optimizer REG LP

The MIDI Optimizer is suitable for more than 90% of the Atlas Copco tool range and is the best choice for assembly tools, percussive tools, drills, nibblers and grinders up to Turbo. The MIDI Optimizer has a 3/4” connection thread, and the housing and bowl are made of polymer. The bowl has a highly chemical resistant polypropylene insert and the bowl is directly screwed to the housing for easy handling. All separate units, mounting brackets, assembly kits and pressure gauges need to be ordered separately. The MIDI Optimizer F/RD and FRD unit are delivered complete with mounting bracket, assembly kit and pressure gauge. Atlas Copco regulators ensure optimal flow at the specific flow rates required by Atlas Copco tools, or any other pneumatic tools. The regulator will optimize the performance of your tool, ensure torque accuracy and boost productivity.

  • 55 l/s max. air flow for combined units
  • Low pressure drop
  • Self-adjusting nano mist lubricator for correct amount of lubrication
  • Possible to refill the lubricator when in use and pressurized
  • The filter reduces water and dirt in the pneumatic components
  • The lubricator prolongs the life of a vane motor up to three times
  • Working temperature -40°C to +60°C at 10 bar
  • Working temperature for filters +2°C to +60°C at 10 bar
  • 0-16 bar inlet pressure capacity
  • 0.5-8 bar outlet pressure capacity
  • Standard filter 30 µm to reduce dirt in the components
  • LP Lockable Regulator
Contact Us

Send us an email and we'll get back to you.

Not readable? Change text. captcha txt